Products

Mechanical asphalt paver Asphalt drum mix plant
Super asphalt paver Wet mix macadam plant
Electronic sensor paver Bitumen sprayers
Wet mix paver    
 
Mechanical asphalt paver
“LAABH” Paver Finisher machine with Mechanical transmission drive, suitable for Bituminous Macadam paving. Model : L-JK-108/AM

Specifications:
  • Kirloskar’ make 4 Cylinder 65 B.H.P., Water Cooled Diesel Engine – Model: 4R 1040.
  • Paving width - 2.5 mtrs. (min.) and 4.0 mtrs. (max.) with extension blocks.
  • Paving thickness - 12.5 mm to 200 mm.
  • Paving speed - 1.5 to 3.0 mtrs./min.
  • Travelling speed - 16 Km/hr.
  • Hopper capacity – 4.0 Cu. mtrs.
  • Front Wheels – Solid Rubber tyres – 2 nos.
  • Rear Wheels – Pneumatic tyres (1020) – 2 nos.
  • Leyland’ Automotive Gear box and heavy duty clutch for traction power transmission.
  • Heavy duty chain and sprocket for rear wheel drive.
  • Screed heating by LPG burners & Screed vibration by eccentric shaft driven by hydraulic motor.
“LAABH” SUPER Paver Finisher machine with Mechanical transmission drive and hydraulically extendable screed, suitable for Bituminous Macadam paving. Model : L-JK-108/AHS

Specifications
  • Kirloskar’ make 4 Cylinder 65 B.H.P., Water Cooled Diesel Engine – Model: 4R 1040.
  • Paving width - 2.5 mtrs. (min.) and 4.5 mtrs. (max.) with hydraulically extendable telescopic screed.
  • Paving thickness - 12.0 mm to 200 mm.
  • Paving speed - 1.5 to 4.5 mtrs./min.
  • Travelling speed – 14.5 Km/hr.
  • Hopper capacity – 4.5 Cu. mtrs.
  • Front Wheels – Solid Rubber tyres – 4 nos.
  • Rear Wheels – Pneumatic tyres (1120)– 2 nos.
  • Leyland’ Automotive Gear box and heavy duty clutch for traction power transmission.
  • Heavy duty chain and sprocket for rear wheel drive.
  • Screed heating by LPG burners & Screed vibration by eccentric shaft driven by hydraulic motor.
TOP
“LAABH” SENSOR Paver Finisher machine with Hydrostatic transmission drive and Electronic auto slope & grade control, suitable for Bituminous Macadam paving. Model : L-JK-108/HES

Specifications:
  • Kirloskar’ make 6 Cylinder 102 B.H.P., Water Cooled Diesel Engine – Model: 6R 1080.
  • Transmission to traction wheel, feeder conveyor chain, augers, steering unit, compaction & temping unit powered by German make hydraulic pump & motor.
  • MOBAGerman make Grade & Slope control with remote controller.
  • Paving width - 2.5 mtrs. (min.) to 4.5 mtrs. (max.) with hydraulically extendable telescopic screed. (up to 5.0 mtrs. with extension blocks)
  • Paving thickness - 12 mm to 250 mm.
  • Paving speed - 0 to 30 mtrs./min.
  • Travelling speed – 18 Km/hr.
  • Hopper capacity – 5.0 Cu. mtrs.
  • Front Wheels – Solid Rubber tyres – 4 nos.
  • Rear Wheels – Pneumatic tyres (1020) – 4 nos.
  • Screed heating by LPG burners.
  • Feather touch operation console.
Wet mix paver TOP
“LAABH” dual purpose SUPER Paver Finisher machine with Mechanical transmission drive and hydraulically extendable screed, suitable for Bituminous & Wet Mix Macadam paving. Model : L-JK-108/WHS

Specifications
  • Kirloskar’ make 4 Cylinder 65 B.H.P., Water Cooled Diesel Engine – Model: 4R 1040.
  • Paving width - 2.5 mtrs. (min.) and 4.5 mtrs. (max.) with hydraulically extendable telescopic screed.
  • Paving thickness - 12 mm to 200 mm.
  • Paving speed - 1.5 to 4.5 mtrs./min.
  • Travelling speed – 14.5 Km/hr.
  • Hopper capacity – 4.5 Cu. mtrs.
  • Front Wheels – Solid Rubber tyres – 4 nos.
  • Rear Wheels – Pneumatic tyres (1120)– 2 nos.
  • Leyland’ Automotive Gear box and heavy duty clutch for traction power transmission.
  • Heavy duty chain and sprocket for rear wheel drive.
  • Screed heating by LPG burners & Screed vibration by eccentric shaft driven by hydraulic motor.
  • Specially designed conveyor chain suitable for mounting Rubber belt for Wet Mix material.
  • Ni-hard Augers for longer life.
Asphalt drum mix plant TOP

Our DM series Asphalt Drum Mix Plants are manufactured as per M.O.R.T & H and International standards to meet the customer’s requirement of producing quality hotmix for bituminous pavement construction.

Stationary and Mobile Asphalt Drum Mix Plants manufactured in different models with output capacities ranging from 40 TPH to 120 TPH.

Model: DM-45 – output capacity 40 to 60 TPH
Model: DM-50 – output capacity 60 to 90 TPH
Model: DM-60 – output capacity 90 to 120 TPH

Apart from above standard models plant with higher capacities are also offered.

Basic Components of Asphalt Drum Mix Plant:
  • Four Bin Feeders for Cold Aggregates.
  • Single Deck Vibratory Screen.
  • Slinger (Cold) Conveyor.
  • Rotary Drum with Auto Burner, Multi-cone type Dust Collector & Exhaust Blower with Stack.
  • Hotmix Load out Conveyor with Gob Hopper and Power Pack.
  • Insulated Asphalt Tank with Burner & Asphalt Pumping Station.
  • Mineral Filler Unit with pneumatic conveying system
  • L.D.O tank with fuel pump.
  • Computerized Control Panel with Printer.
  • Control Cabin.
  • Wet Scrubber type Pollution Control Unit (Optional).
Wet mix macadam plant TOP

Our WMM series Wet Mix Macadam Plants are manufactured as per M.O.R.T & H and international standards to meet the contractor’s requirement of producing homogeneous mix material for pavement base & sub base construction.

Wet Mix Plants manufactured in different models with output capacities ranging from 100 TPH to 200 TPH.

Model: WMM-100 – output capacity 100 TPH
Model: WMM-160 – output capacity 160 TPH
Model: WMM-200 – output capacity 200 TPH

Basic Components of Wet Mix Plant
  • Four Bin Feeders for Aggregates and Sand.
  • Single Deck Vibratory Screen.
  • Slinger (Cold) Conveyor.
  • Twin shaft Pugmill Mixer
  • Load out Conveyor with Gob Hopper and Power Pack.
  • Water Pump with Electric Motor
  • Computerized Control Panel with Printer.
  • Control Cabin.
  • Storage Silo (Optional).
TOP

Our TBS series Bitumen Sprayers are manufactured for tack coat and seal coat application during road construction. These are also suitable for Emulsion spraying.

TRUCK MOUNTED BITUMEN SPRAYER

Models
  • TBS-40 : with 4000 liters tank capacity.
  •  TBS-60 : with 6000 liters tank capacity.
  • TBS-80 : with 8000 liters tank capacity.
    • Prime mover 25 H.P. two cylinder, air cooled diesel engine of reputed make.
    • Insulated Bitumen tank with LAP burner.
    • Bitumen pumping system comprising of positive displacement gear type Bitumen Pump.
    • Bitumen piping with mechanical valves.
    • Air Compressor.
    • Foldable spray bar with basic width 2.5 mtrs. & extendable upto 4.2 mtrs.
    • Spray bar fitted with pneumatic cylinder for operating spray nozzle valve.
    • Hand spraying with flexible hose attachment.

TROLLEY MOUNTED BITUMEN SPRAYER
  • Prime mover 6.0 H.P. single cylinder, air cooled diesel engine of reputed make.
  • Insulated Bitumen tank of 2.5 tons capacity with LAP burner.
  • Bitumen pumping system comprising of positive displacement gear type Bitumen Pump.
  • Bitumen piping with mechanical valves.
  • Air Blower.
  • Hand spray bar with S.S. corrugated flexible hose pipe.
  • Trolley with 4 nos. pneumatic tyres and tow bar.
 
Home  ||About Us  || Services  || Products  || Feedback  || Contact

All Rights Reserved by Jay Khodiyar Metal industries
Powered by
Jalaram Infotech